Step 01

Upload LAS File

Waiting
LAS

Drop LAS here or click to browse

Supported: .las well-log files.

No file uploaded yet

Upload
Map Curves
Visualize
Screen Zones

Well Metadata

No LAS loaded

Field--
Company--
Country--
Depth Range--
Curves--
Samples--

Step 02

Curve Mapping & User Edits

Auto-detected curves can be changed before calculation. Vsh and porosity methods are selectable and are applied to the uploaded LAS only.

Step 03

CO₂ Storage Zone Screening

Reservoir zones are calculated from petrophysical cutoffs applied to the uploaded logs. Auto mode derives robust screening cutoffs from each well distribution; turn it off to use your own formation-specific limits.

Auto cutoffs will be calculated after screening from the uploaded well.
Run screening to display CO₂ storage zones.

Step 04

Seal / Caprock Screening

Seal candidates are detected from logs as shale-rich, tight, low-permeability intervals. They are used only when positioned above reservoir candidates.

Run screening to display seal/caprock candidates.

Step 05

Reservoir–Seal Pair Ranking

Final CCUS candidates are reservoir zones matched with the nearest valid overlying seal. This prevents random seal intervals from being treated as final zones.

Run screening to display matched reservoir–seal pairs.

Step 06

Interactive Multi-Track Visualization

One interpretation layer is shown at a time, based on the selected cutoffs.
Upload LAS and run screening to visualize logs.

CO₂ Storage Screening

Zone Quality Guide

CO₂ possible zoneCandidate top line where selected cutoffs pass.
Seal / caprock candidateBlue shading means high Vsh, tight PHIE, and low permeability proxy.
Reservoir-seal pairRanks storage intervals with nearest overlying seal.
Poor boundaryRed top line means PHIE, Vsh, or permeability failed.
Porosity/permeability source info will appear here.

Step 07

Zone Ranking & Recommendation

Ranks the final reservoir–seal pairs using reservoir quality, seal quality, vertical gap, net thickness, and log confidence.

Reservoir Zones--
Seal Candidates--
Valid Pairs--
Net Storage Thickness-- m
Run screening to see the recommended final CCUS candidate.

Decision Support

Ranked Final Zones

Run screening to display ranked reservoir–seal pairs.

Step 08

CO₂ Storage Capacity Estimation

Run screening first
MCO₂ = A × h × φe × E × ρCO₂

Reservoir top, base, thickness and effective porosity are taken directly from the selected screened reservoir interval. Only area, CO₂ density and storage efficiency are entered by the user.

Reservoir Top--
Reservoir Base--
Reservoir Thickness--
Effective Porosity--
Editable screening assumptions. Reservoir thickness and PHIE always come from the selected LAS-derived zone.
Estimated CO₂ Storage Capacity -- Mt CO₂
Capacity uses the selected LAS-derived reservoir thickness and effective porosity.

Step 09

Final CCS Screening Results

Export Full Excel
ZoneTypeTopBaseThicknessAvg PHIEAvg VshAvg Perm mDAvg GRAvg RTQuality IndexNet ThickStatus
No results yet.